larger imageMove mouse over the image to magnify

RC3

Tool for measuring engine temperature and RPM, essential for complete emission analysis. As well as featuring the same systems as the RC2, this can also acquire the data directly from the EOBD socket, without having to open the bonnet. Communicates with the display interfaces and MULTI PEGASO using Bluetooth technology.

View Certification

Revcounter and engine temperature from OBD socket

The RC3 module is used to measure engine RPM and temperature on all types of vehicles.

RC3 features three different measurement modes:

using microphone and residual battery capacity signal.
using an inductive clamp and piezoelectric sensors.
via the EOBD socket for all vehicles conforming to Euro3 (usually vehicles made after 2000);

When using the latter mode to measure engine RPM and temperature, the tool can perform the tests without needing to open the bonnet.
RC3 can also be used in scan-tool mode; connected to the EOBD socket, it can read the parameters defined by this standard in accordance with new emission control procedures.

Both the emission analysis modules and the RC2 and RC3 modules are separate units from the MULTI PEGASO and can communicate with the latter without requiring connection cables. Nonetheless, when the test is complete they can be attached to the trolley with a quick and simple operation for maximum space-saving.

Technical Specifications:

• Universal RPM counter for petrol and diesel engines
• Compatible with engine oil temperature sensor
• Connection with processing unit via serial or USB cable and Bluetooth
• Device for completing emission analysis for use with GASBOX Autopower and OPABOX Autopower
• Three different methods for measuring RPM

Main processor: MB90F591 16MHz
External power supply: 8 to 32 Volt
Resources serial: 1 USB connection - 1 standard RS232 connection
Wireless connection to PC: Bluetooth technology Petrol and diesel readings from vehicle battery: 12V DC and 24V DC system management
Analogue petrol reading: Induction clamp
Analogue diesel reading: Piezoelectric clamp
EOBD identification: ISO9141-2, ISO14230, SAE J1850 PWM, SAE J1850 VPW,CAN ISO11898
Operating temperature: +0°C / +45°C
Storage temperature: -20°C / +60°C
Operating humidity: 10% to 80% non-condensing
Dimensions (with antenna): 155 (227) x 162 x 63 mm
Weight: 0.8 kg

You might also be interested in ...

Axone 4

AXONE 4 is the new "TEXA flagship", with a wealth of the latest technical measures to offer the best there is in workshop assistance. AXONE 4 presents a series of absolutely unique characteristics, many of which are linked to the concept of an internet connection.

Axone Palmtop

The display interface for completely wireless multibrand diagnostics. The compact dimensions mean it can be easily kept in the pocket. Complete with the innovative Google Search Appliance

TwinProbe

TwinProbe allows for the complete multi-make diagnosis and can intervene on cars, motorcycles, scooters, quad bikes and nautical means alike, as well as on light and heavy commercial vehicles, coaches, vehicles carrying oversize loads and agricultural vehicles.

OPABOX Autopower

The tool for analysing exhaust emissions from diesel engines. The built-in batteries ensure more than 6 hours of continuous operation, without the restriction of power cables. Communicates with the TEXA display interfaces and MULTI PEGASO using Bluetooth technology.

RC3