larger imageMove mouse over the image to magnify

RC3

Tool for measuring engine temperature and RPM, essential for complete emission analysis. As well as featuring the same systems as the RC2, this can also acquire the data directly from the EOBD socket, without having to open the bonnet. Communicates with the display interfaces and MULTI PEGASO using Bluetooth technology.

View Certification

Revcounter and engine temperature from OBD socket

The RC3 module is used to measure engine RPM and temperature on all types of vehicles.

RC3 features three different measurement modes:

using microphone and residual battery capacity signal.
using an inductive clamp and piezoelectric sensors.
via the EOBD socket for all vehicles conforming to Euro3 (usually vehicles made after 2000);

When using the latter mode to measure engine RPM and temperature, the tool can perform the tests without needing to open the bonnet.
RC3 can also be used in scan-tool mode; connected to the EOBD socket, it can read the parameters defined by this standard in accordance with new emission control procedures.

Both the emission analysis modules and the RC2 and RC3 modules are separate units from the MULTI PEGASO and can communicate with the latter without requiring connection cables. Nonetheless, when the test is complete they can be attached to the trolley with a quick and simple operation for maximum space-saving.

Technical Specifications:

• Universal RPM counter for petrol and diesel engines
• Compatible with engine oil temperature sensor
• Connection with processing unit via serial or USB cable and Bluetooth
• Device for completing emission analysis for use with GASBOX Autopower and OPABOX Autopower
• Three different methods for measuring RPM

Main processor: MB90F591 16MHz
External power supply: 8 to 32 Volt
Resources serial: 1 USB connection - 1 standard RS232 connection
Wireless connection to PC: Bluetooth technology Petrol and diesel readings from vehicle battery: 12V DC and 24V DC system management
Analogue petrol reading: Induction clamp
Analogue diesel reading: Piezoelectric clamp
EOBD identification: ISO9141-2, ISO14230, SAE J1850 PWM, SAE J1850 VPW,CAN ISO11898
Operating temperature: +0°C / +45°C
Storage temperature: -20°C / +60°C
Operating humidity: 10% to 80% non-condensing
Dimensions (with antenna): 155 (227) x 162 x 63 mm
Weight: 0.8 kg

You might also be interested in ...

Axone 4 Mini

The AXONE 4 Mini is a brand new compact but extremely advanced diagnostic tool that incorporates most of the extraordinary functions that have made the AXONE 4 tablet such a success around the world.

Navigator Nano

Navigator nano is the most evolved self-diagnosis device for cars and light commercial vehicles fitted with OBD sockets. The advanced miniaturisation techniques used have allowed us to reduce the space required and instrument weight by more than 85% as compared with a traditional solution, leaving diagnosis depth and potential unchanged.

NanoService

NanoService is the specific self-diagnosis interface for fast-fit centres, tyre specialists and service areas, which allow for ordinary maintenance work to be carried out on vehicles fitted with OBD sockets. It is a small device with an extremely high performance, to be used combined with a Windows PC.

OBD Log

Small on-board diagnostic device to be connected directly to the vehicle’s diagnostic socket. It may then carry out any checks, EOBD protocol parameter registrations and the proceeding vehicle’s intermittent anomaly check.

RC3