larger imageMove mouse over the image to magnify

RC2

It is a tool for temperature and engine speed acquisition, fundamental to carry out completely the emissions analysis. Thanks to the Bluetooth technology, it communicates with the visualization interfaces and with MULTI PEGASO.

View Certification

Revcounter and engine temperature

RC2 is the electronic system for measuring engine speed and temperature. Featuring a magnetic case, meaning it can be attached to the bonnet or the side members to run the tests with extreme ease, RC2 features two modes for measuring engine speed: using a microphone and the residual battery capacity signal, or alternatively induction probes and piezo sensors.

Technical Specifications:

• Universal RPM counter for petrol and diesel engines
• Compatible with engine oil temperature sensor
• Connection with processing unit via serial or USB cable and Bluetooth
• Device for completing emission analysis for use with GASBOX Autopower and OPABOX Autopower
• Three different methods for measuring RPM Main processor: MB90F591 16MHz

External power supply: 8 to 32 Volt
Serial resources: 1 standard RS232 connection
Wireless connection to PC: Bluetooth technology
Petrol and diesel readings from vehicle battery: 12V DC and 24V DC system management
Analogue petrol reading: Induction clamp
Analogue diesel reading: Piezoelectric clamp
Operating temperature: +0°C / +45°C
Storage temperature: -20°C / +60°C
Operating humidity: 10% to 80% non-condensing
Dimensions (with antenna): 130 x 150 x 27 mm
Weight: 0.36 kg

You might also be interested in ...

GASBOX Autopower

The tool for analysing exhaust emissions from petrol engines. The built-in batteries ensure more than 6 hours of continuous operation, without the restriction of power cables. Also features wireless communication with the display interfaces and MULTI PEGASO, using Bluetooth technology.

RC3

Tool for measuring engine temperature and RPM, essential for complete emission analysis. As well as featuring the same systems as the RC2, this can also acquire the data directly from the EOBD socket, without having to open the bonnet. Communicates with the display interfaces and MULTI PEGASO using Bluetooth technology.

AIR+

The ultrasound nebuliser which provides a specific solution via vaporized micro drops. The sanitizing solution penetrates the system and clears it of any mildew, bacteria and dust via a flow of air which is free of any micro-organisms.

OBD Log

Small on-board diagnostic device to be connected directly to the vehicle’s diagnostic socket. It may then carry out any checks, EOBD protocol parameter registrations and the proceeding vehicle’s intermittent anomaly check.

RC2